Strict Standards: Only variables should be assigned by reference in /home/marketpl/public_html/includes/modules/pages/product_info/jscript_zen_magiczoom.php on line 6
Currency in Pounds   Currency in Euros   Currency in US Dollars

Strict Standards: Only variables should be assigned by reference in /home/marketpl/public_html/includes/templates/orange/templates/tpl_modules_main_product_image.php on line 19

Strict Standards: Only variables should be assigned by reference in /home/marketpl/public_html/includes/modules/orange/additional_images.php on line 29
Volcano Vaporizer Digital - Vaporiser
Move your mouse over image

Volcano Vaporizer Digital - Vaporiser





Digital Volcano vaporizer


The advantage of the Volcano Digit lies in its large LED display, which immediately and precisely informs the user of the operating status. The Volcano Digit communicates better with the user and its electronic control system works even more precisely than the bi-metal regulator on the Volcano Classic

  • Precise electronic control
  • Extra large, digital LED display with set and
    actual temperature
  • Vaporization temperature can be set between
    40° and 230°C (104° and 446°F)
  • Temperature accuracy ± 1,5°C (2,7°F)
  • Display changeover between °Celsius and °Fahrenheit
  • Two year warranty
  • Automatic switch off

Both Volcano vaporizers come with a shapely, brushed metal cone. Care was taken to use flavorless materials

that are food safe. Both the high-performance heating cartridge and the strong diaphragm pump can withstand

the toughest stresses and strains.


An independent temperature fuse, air filter and silencer are naturally included in our Volcano vaporizers,

as is a specially designed aluminium heat exchanger, which brings the air both cleanly and reliably to the

desired temperature.


How does it works?

The volcano vaporizer uses temperature controlled hot air to extract the active compounds of your smoke. The hot air brings the volatile plant compounds to a boil and vapor forms. The balloon like bag is then filled with vapor ready for the awaiting user!

For Both the Standard and digital volcanos there are two Valve choices: the original Solid valve, and the new Easy valve.

The Solid Valve kit is sold as a more advanced version of the vent-balloon system. With the Solid Valve kit, you will be able to control the size of the vapor-holding mechanism (balloon-like bag) in order to match your vaporizing needs. The Easy Valve kit has standard vent-balloons for those who do not need to customize the size of the balloon.

The Solid Valve (original option) -

This is the original valve that went into the production of both the Digital or Classic hot air generators.

It comes with accessories such as cleaning brush, normal screen set, liquid pad for heating liquids and an extra roll balloon where the vapor is collected and stored.

The Sold valve itself consists of sub-assembly parts that use these accessories:

Filling Chamber for Herbs: is designed to hold a small amount of herbs you intend to have vaporized.

Filling Chamber for Liquids: is designed to hold liquids and oils for vaporization.  This is where the liquid pads apply and need to be cleaned or replaced after each use.

Mouthpiece: this is attached to the balloon to seal off the vapor being collected into the balloon and used for your inhalation through the mouth.

Filling Chamber Insert: is an assembly that contains the upper screen to trap herb particles from getting into the valve.

Screen Set: this is either Normal or Fine meshed steel screens positioned in the chamber insert that may be cleaned or replaced after each use.

A consumer needs to be bit more patient and informed on how to put together the parts and accessories of the Solid Valve as well as how to clean them properly.

Each of the accessories that come with the solid valve set is sold for your convenience


The Easy Valve -

The easy valve option is basically the plug in a play version of the solid valve. As the name suggests, the Easy Valve enjoys easy handling with very little maintenance work.

The balloon comes with a built-in valve. Just plug the balloon with the easy valve and that is it. You can just detach the valve if you need replacement.

It has been developed from user comments and suggestions for a fast and more convenient way to use either of the two Volcano hot air generators.

On the easy valve version the balloon is set to fill to a standard size. Simply detach, dispose and replace with a new bag to continue. You don’t have to clean the valve and mouth piece. You only need to replace them outright after they’ve seen better days. 

The Easy Valve is best used with the more recent Volcano hot air generators sporting a black seating, which it’s optimised precisely for it. Volcano Vaporizers manufactured since 2006 have this type of vent. The filling chamber on the Easy Valve “clicks” perfectly on its black seat.
But you still can use the Easy Valve on older models, which have a grey coloured vent. You just won’t hear a “click” and it doesn’t lock perfectly as in the newer black vents.

No. the top temperature reached in the heating block 240°C (464°F) is by far below the temperature that is needed to emit any substances out of the aluminium alloy AlMgSi, melting point 660°C (1220°F); boiling point 2519°C (4566°F) used by us. This is documented by an analysis of the air produced by the Volcano on top temperature made by the UTM Office for Environmental Engineering in Münster, Germany

  • Model: VOLCDIGI

Please Choose:

Strict Standards: Only variables should be assigned by reference in /home/marketpl/public_html/includes/modules/orange/additional_images.php on line 29

Share it:

This product was added to our catalog on Tuesday 12 January, 2010.

Copyright © 2017 Market Place Brighton - Powered by samcmoore design
Marketplace-Brighton Ltd

Company Number: 06467246